Aluminium Alloy 6063A
Aluminium alloy 6063A is a variation of 6063 with greater strength but retains the same good surface finish qualities and affinity for anodising.
6063A is used in the same applications as 6063. It is also used in:
Extreme sports equipment
Aluminium Alloy 6063
Aluminium alloy 6063 is a medium strength alloy commonly referred to as an architectural alloy. It is normally used in intricate extrusions.
It has a good surface finish, high corrosion resistance, is readily suited to welding and can be easily anodised. Most commonly available as T6 temper, in the T4 condition it has good formability.
6063 is typically used in:
In balustrading the rails and posts are normally in the T6 temper and formed elbows and bends are T4. T4 temper 6063 aluminium is also finding applications in hydroformed tube for chassis.
Aluminium alloy 6063/6063A also corresponds to the following standard designations and specifications but may not be a direct equivalent:
ASTM B241 (Pipe- Seamless)
ASTM B345 (Pipe- Seamless)
The most common temper for 6063 aluminium are:
- T6 - Solution heat treated and artificially aged
Alloy 6063 is supplied as standard extrusions including tee, channel, angle and flat bar as well as box section and tube
6063 is suitable for all conventional welding methods.
Welding wire generally should be alloy 5183 or alloy 4043.
When maximum electrical conductivity is required use alloy 4043.
For strength and conductivity use alloy 5346 and increase the size of the weld to compensate for the lower conductivity.
Weldability – Gas: Excellent
Weldability – Arc: Excellent
Weldability – Resistance: Excellent
Workability - Cold: Average